Thermal Spray Foam Removal in Bridgwater is the fastest way to deal with failed spray foam insulation that is trapping damp in your roof timbers. We cut out open cell and closed cell foam, clean the rafters back to bare timber, and leave your loft ready for a surveyor. Whether you are in Wembdon, Hamp or out at Puriton, we handle heat based foam removal Bridgwater homeowners and landlords can actually get signed off.
Thermal Spray Foam Removal in Bridgwater is the controlled stripping of cured polyurethane foam from roof timbers, rafters and loft decks using heat, mechanical cutting and industrial extraction. Spray foam was sold as a quick fix for cold lofts, but once it cures it seals the roof deck, blocks ventilation and holds moisture against the timber. We cut the foam back in sections, bag it, and vacuum the dust so your loft ends up clean rather than a building site.
Most of the calls we take in Bridgwater come from people who have had a surveyor flag spray foam insulation during a house sale, or who have spotted condensation and damp from spray foam on the underside of their roof. Homes around Durleigh and Chilton Trinity sit in damp, low-lying ground, and that makes trapped moisture worse. If you are searching for thermal spray foam removal near me Bridgwater, we can usually get an assessment booked the same week.
Every removal job includes the survey, the strip, the clean-up and the paperwork. We do not charge extra for extraction, disposal or the report, and we do not leave you to sort out ventilation on your own.
We visit, measure the loft, identify the foam type and take moisture readings on the rafters. You get a fixed written price the same day, usually within two hours of the visit, with no obligation to book.
We cut and remove all accessible spray foam from rafters, roof decks and loft floors, running an industrial vacuum extraction unit throughout. Foam is bagged on site and removed the same day.
Residual foam is cleaned off the rafters and we re-check moisture with a meter. Every timber is photographed before and after so you have a dated record for your lender or surveyor.
We clear the eaves, remove any loft ventilation blockage and refit breathable membrane where it has been damaged. The aim is to get air moving through the roof again so condensation stops forming.
You get a signed summary of the work, dated before and after photos, and moisture readings. This is the package Bridgwater lenders and surveyors ask for when spray foam has been flagged.
All foam, dust and contaminated insulation is disposed of through licensed carriers. We provide waste transfer notes on request, which some commercial clients and insurers need for their records.
We visit, measure the loft, check the foam type with a boroscope inspection camera and take moisture readings on the rafters. You get a fixed price the same day, usually within two hours of the visit. No charge for the survey, no pressure to book on the spot.
On the day we lay dust sheets, seal the loft hatch and set up the air scrubber and negative air machine. If you are living in the property we work room by room so you are never without access. Setup takes around 45 minutes on a standard three-bed semi.
We cut the foam back using an oscillating multi-tool and reciprocating saw, working in manageable sections so the timber is never overloaded. The industrial vacuum extraction unit runs continuously, pulling dust and foam fragments straight into sealed bags. Most lofts take one to two days.
Once the bulk is out we clean residual foam off the rafters, check for rot with the moisture meter and photograph every timber for your records. If we find structural timber decay we flag it in writing and recommend a timber specialist before you reinsulate.
We clear the eaves, refit breathable membrane where needed and confirm air is moving through the loft. You get a written summary, before and after photos, and advice on what insulation to fit next. We do not leave until the loft is clean and dry.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
For controlled cutting of foam close to rafters without gouging the timber. It lets us work in tight corners and around services.
For thicker closed cell spray foam where a multi-tool would be too slow. We use it in sections to avoid loading the roof structure.
Runs continuously during the strip to pull foam dust and fragments into sealed bags, keeping the loft and the rest of the house clean.
Creates negative pressure in the loft so dust cannot escape into living areas. Essential when tenants or families are in the property.
Lets us see behind rafters and into eaves before we quote, so we know exactly what foam is there and how far it spreads.
Used before and after removal to measure timber damp and map cold spots. The readings form part of your written report.
For delicate or listed timber where abrasive methods would cause damage. It lifts foam residue without gouging the surface.
A three-bed semi in Wembdon with closed cell foam across every rafter. The buyer's surveyor flagged it, the lender refused to proceed, and moisture readings on the timber sat at 22%. The loft smelled musty and the eaves were completely blocked.
We stripped the foam over two days, cleaned the rafters back to bare timber and cleared the eaves. Moisture readings dropped to 15% within four weeks. The dated photo report went to the lender, and the sale completed at the agreed price.
A bungalow in Puriton with open cell foam that had been in place for over a decade. Condensation was dripping from the felt onto stored boxes, and the owner had noticed a persistent damp smell in the back bedroom.
One day to strip the foam, one day to clean and reinstate ventilation. The musty smell cleared within a week, the felt stopped dripping, and the owner was able to use the loft for storage again without everything coming out damp.
A commercial unit near Dunball with spray foam across a large-span roof. The insurer had asked for removal before renewing cover, and the site needed to keep operating throughout the work.
We phased the strip over five days, working around operating hours and using thermal blasting equipment on the harder sections. The insurer signed off on the photo record and waste transfer notes, and the site never closed.
Spray foam causes a predictable set of problems, and we see the same ones across Bridgwater. Here is what we fix, and what happens if it is left alone.
Ask a pro →We strip the foam, photograph every rafter and supply a dated report with moisture readings. That package goes straight to your buyer's lender, and we can usually complete the work within a week of the survey.
We remove the foam, clear the loft ventilation blockage and refit breathable membrane so the roof can dry. Moisture readings typically drop from around 22% to under 16% within three to four weeks.
We remove the foam, run air scrubbers during the strip and ventilate the loft afterwards. In most Bridgwater homes the odour clears within a few days of removal once airflow is restored.
Our removal report and photos give insurers the evidence they need that the foam is gone and the roof is sound. Many clients find cover becomes straightforward again once the paperwork is in place.
Most Bridgwater lofts cost between 1,200 and 4,500 pounds in 2026, with the average three-bed semi landing around 2,200 pounds. Price depends on loft size, foam thickness, whether it is open cell or closed cell, and how much timber cleaning is needed. Cavity wall foam removal is quoted separately. You get a fixed price after a free survey, so there are no surprises on the invoice.
It is the process of stripping cured polyurethane spray foam off roof timbers using heat, cutting tools and industrial extraction. The aim is to free the timber so it can dry, restore airflow at the eaves, and give you a loft a surveyor will pass. We remove both open cell spray foam and the much harder closed cell spray foam, and we clean the rafters back to bare wood.
Yes, when it is done with controlled cutting rather than brute force. We cut foam in sections with an oscillating multi-tool and reciprocating saw, check moisture with a meter before and after, and stop if we find structural timber decay. In most Bridgwater roofs the timber is sound underneath and dries out within three to four weeks once the foam is gone.
A standard three-bed semi takes one to two working days from setup to handover. Larger lofts, thick closed cell foam or heavy contamination can run to three days. We give you a realistic timeframe at the survey, not an optimistic one, and we do not leave a job half stripped overnight if the roof is exposed to rain.
Spray Foam Removal near meOur core service for Bridgwater and the surrounding villages. If you are searching for spray foam removal near me, we cover lofts, rafters, cavity walls and roof decks across Somerset with the same fixed-price approach.Explore →
Same day Spray Foam RemovalWhen a lender or buyer needs an answer fast, we try to fit same day spray foam removal in Bridgwater. Call before 10am and we can often survey and start the strip the same afternoon.Explore →
24/7 Spray Foam RemovalFor urgent cases, such as a collapsed sale or water getting into a stripped roof, our 24/7 spray foam removal line stays open. Call 0127 827 6038 any hour and we will arrange the earliest safe slot.Explore →
Residential Spray Foam RemovalMost of our Bridgwater work is residential: semis, terraces and bungalows in Hamp, Sydenham and Bower Manor. We work around your family, protect floors and furniture, and leave the loft clean enough to store boxes again.Explore →
Commercial Spray Foam RemovalWe strip spray foam from commercial roofs, warehouses and agricultural buildings around Dunball and Puriton. Larger jobs are phased so your operation keeps running, and we work to your insurer's requirements for foam removal.Explore →
Loft Spray Foam RemovalLoft spray foam removal is the most common job we do in Bridgwater. We remove foam from rafters and loft decks, clear the eaves, and get ventilation moving again so condensation stops forming on the felt.Explore →
Roof Spray Foam RemovalFoam applied directly to roof decks and sarking is stripped with the same heat and cutting method. We protect the roof covering, work safely at height, and photograph every section for your records.Explore →
Attic Spray Foam RemovalAttic spray foam removal covers older properties with tight access and low headroom, common in Eastover and Bridgwater Town Centre. We use compact tools and a boroscope inspection camera to work in confined spaces without damaging the structure.Explore →Free survey, fixed price, and a written report your lender will accept. We are CHAS accredited, fully insured, and we have been stripping spray foam in Somerset since 2022. Call 0127 827 6038 and we will tell you honestly when we can get to you.
Get a free survey 0127 827 6038 →Call 0127 827 6038 or email us and a technician will get back to you the same working day. We answer the phone from 8am to 6pm Monday to Friday, and our emergency line is staffed 24/7 for urgent foam problems. Free surveys across Bridgwater and the surrounding villages, usually booked within two working days.