Environmentally friendly insulation removal in Bridgwater, Somerset is the clean, low-dust way to strip failing spray foam from lofts, rafters and cavity walls. We handle eco insulation removal Bridgwater homeowners and landlords call us for when a surveyor has flagged spray foam, when roof timbers are sweating, or when a mortgage lender wants it gone before completion. We extract, bag and recycle what we can, then leave your loft ready for breathable membrane and fresh loft insulation.
Environmentally friendly insulation removal in Bridgwater, Somerset is the controlled stripping of spray foam insulation from roof timbers, lofts and cavity walls using extraction rather than brute force. We cut the foam back with oscillating multi-tools and reciprocating saws, pull it out with an industrial vacuum extraction unit, and run an air scrubber and negative air machine so dust and chemical odour stay inside the work zone. Open cell spray foam comes away in soft lumps; closed cell spray foam and polyurethane foam need more cutting because they bond hard to roof timber and plasterboard.
Bridgwater homes get hit by two things at once: Somerset's damp winters and older roof structures that were never designed to carry spray foam. When vapour barrier and loft ventilation blockage combine, condensation and damp from spray foam rot the rafters from the inside. We see it constantly around Eastover and Hamp, where homeowners need eco insulation removal Eastover Bridgwater because a surveyor flagged spray foam insulation and the lender will not release funds until it is out.
Every environmentally friendly insulation removal job in Bridgwater includes assessment, containment, extraction, timber inspection and documented handover. Reinstatement of new loft insulation is quoted separately so you can see exactly what you are paying for.
We inspect with a boroscope inspection camera and thermal imaging camera, check timber with a moisture meter, and identify whether you have open cell spray foam, closed cell spray foam or a mix. You get a fixed price before we book the work.
Protective sheeting, sealed doorways and loft hatches, an air scrubber and a negative air machine. This is what keeps dust and spray foam odour out of your living space while we cut and extract.
Foam is cut with oscillating multi-tools and reciprocating saws, then removed with an industrial vacuum extraction unit. Hard closed cell foam may need a dry ice blasting machine or thermal blasting equipment to protect the timbers.
We check every exposed rafter for structural timber decay and roof timber rot from trapped moisture, and treat what we find. You get photographs of the stripped timbers for your lender, insurer or records.
All foam is bagged, separated by type, and removed under a waste transfer note. Recoverable material goes to licensed recycling routes. You keep the paperwork, which is useful for grant applications and valuations.
Before-and-after photographs, a method statement, and the waste transfer note, all issued the day we finish. This is the pack solicitors, valuers and lenders ask for when spray foam has held up a Bridgwater sale.
We inspect the loft with a boroscope inspection camera and thermal imaging camera, check timber moisture with a moisture meter, and map where spray foam insulation has spread. You get a fixed price the same day. Most assessments take 45 to 60 minutes.
We lay protective sheeting, seal doorways and loft hatches, and set up an air scrubber and negative air machine. This keeps dust and odour out of your living space. Setup usually takes 30 to 45 minutes before any cutting starts.
Foam is cut with oscillating multi-tools and reciprocating saws, then pulled out with an industrial vacuum extraction unit. Hard closed cell spray foam may need a dry ice blasting machine or thermal blasting equipment. A standard loft takes one to two days.
Once the foam is gone we inspect every rafter, check for structural timber decay, and treat any rot we find. We photograph the exposed timbers so you have a record for your lender or insurer. This stage adds two to four hours.
We vacuum the loft, remove all waste under a waste transfer note, and leave the space ready for breathable membrane and new loft insulation. You get before-and-after photographs and a written summary the same day we finish.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Pulls loose foam and dust straight into sealed bags. It is the backbone of every removal we do, and it is why your landing stays clean.
Removes hard closed cell spray foam from timbers without water or chemicals. Ideal where surrounding materials need protecting.
Softens cured foam so it peels away from roof timber without gouging the wood underneath.
Keeps dust and odour inside the work zone. We run both for the whole job, not just while cutting.
Finds hidden foam in awkward corners and spots damp patches before we start cutting.
Reads timber moisture before and after removal, so we know whether rafters are drying out or need treatment.
Cuts foam back cleanly at rafters and wall plates. Precise enough to avoid damaging timber.
A three-bed terrace in Eastover had closed cell spray foam across the entire loft. The buyer's surveyor flagged it, the lender withheld funds, and the sale had been stuck for six weeks with no sign of moving.
We stripped 11 cubic metres of foam over two days, inspected every rafter, and issued the documentation pack. The lender released funds nine days later and the sale completed.
A semi in Wembdon had open cell foam packed between the rafters and a musty smell in the back bedroom. Moisture meter readings on the timbers were high, and condensation was running down the sarking boards.
Foam was extracted in a single day, ventilation was restored, and the timbers were treated. Readings returned to normal within three weeks and the smell cleared.
A farm building near Cannington had closed cell foam bonded hard to old rafters. Two previous contractors had declined the job because of the risk of damaging the timber.
We used dry ice blasting and thermal equipment over three days. All foam was removed, the rafters were intact, and the waste went out under a transfer note.
Most calls we get in Bridgwater come down to one of four problems: a stalled sale, damp timbers, failed insulation performance, or an insurance issue. Here is how we deal with each.
Ask a pro →We assess within 48 hours, strip the foam, and issue the photographs, method statement and waste transfer note your solicitor needs. Most Bridgwater sales we unblock complete within three to four weeks of the first call.
We remove the foam, restore loft ventilation, and check every rafter with a moisture meter. Any rot gets treated before we finish. Exposed timbers usually read normal within two to three weeks of removal.
We strip the foam, clear the loft ventilation blockage, and reinstate with breathable membrane and vapour barrier so moisture can escape. Most customers see the damp and odour clear within a month.
Our documented removal gives your insurer the evidence they need. We provide the method statement, photographs and disposal records, and we can work to PAS 2035 principles on the reinstatement.
Typical 2026 pricing in Bridgwater runs £1,200 to £3,800 for a standard domestic loft, depending on foam type and coverage. Closed cell spray foam costs more to remove than open cell because it bonds harder to roof timber. Larger roofs, cavity wall spray foam removal and commercial units sit above that range. We give you a fixed price after a same-day assessment.
It comes down to three things: contained extraction, recycling, and reinstating the loft correctly. We use an industrial vacuum extraction unit and air scrubber so foam does not escape into the environment, separate recoverable material for licensed recycling, and rebuild with breathable membrane and vapour barrier so the roof performs as designed.
Yes, where the material allows it. We separate open cell spray foam, closed cell spray foam and polyurethane foam on site, bag them, and send recoverable material to licensed recycling routes. Anything that cannot be recycled is disposed of under a waste transfer note. You get a copy for your records, which is useful for grant or valuation paperwork.
A standard domestic loft takes one to two days from containment to handover. Larger roofs, hard closed cell spray foam, or cavity wall spray foam removal can run to three days. We confirm the timeline at assessment, and we do not leave a loft open overnight without sealing it and leaving the air scrubber running.
Spray Foam Removal near meOur core spray foam removal service covers lofts, rafters and cavity walls across Bridgwater. It is the same crew and the same equipment you get on an environmentally friendly insulation removal job, just scoped to whatever foam you have.Explore →
Same day Spray Foam RemovalWhen a lender or surveyor needs foam gone quickly, same day spray foam removal is available across Bridgwater subject to access. We can assess in the morning and start extraction the same afternoon on smaller lofts.Explore →
24/7 Spray Foam RemovalEmergency and out-of-hours spray foam removal for commercial premises, letting agents and urgent completions. We run 24/7 across Bridgwater and the surrounding villages, with containment set up before any cutting starts.Explore →
Residential Spray Foam RemovalDomestic lofts, bungalows, terraces and semis in Bridgwater Town Centre, Hamp and Wembdon. We work around your family, seal the loft hatch, and keep dust out of living spaces while we strip the foam.Explore →
Commercial Spray Foam RemovalWarehouses, workshops and commercial roofs around Dunball and the Bridgwater industrial estates. We work to PAS 2035 principles and provide the documentation facilities managers need for insurance and compliance records.Explore →
Loft Spray Foam RemovalThe most common job we do. Loft spray foam removal in Bridgwater covers rafter-level foam, loft ventilation blockage and reinstatement with breathable membrane and fresh loft insulation once the timbers are clean.Explore →
Roof Spray Foam RemovalFoam applied directly to the underside of roof tiles or sarking boards traps moisture and rots timbers. We strip it, inspect the roof structure, and restore airflow so the roof can dry out properly.Explore →
Attic Spray Foam RemovalAttic spaces in older Bridgwater properties often have foam packed into awkward corners. We use boroscope inspection cameras to find hidden foam and make sure nothing is left behind before reinstatement.Explore →We are CHAS accredited, SafeContractor approved and insured, and we have been removing spray foam across Bridgwater since 2022. Call us for a same-day assessment and a fixed price, with documented removal your lender will accept.
Get a fixed price 0127 827 6038 →Call 0127 827 6038 or email us and a technician will get back to you the same working day. We answer the phone from 8am to 6pm Monday to Friday, and our emergency line is staffed 24/7 for urgent foam problems. Free surveys across Bridgwater and the surrounding villages, usually booked within two working days.